Picking the wrong square tube costs money, time, and trust. Specs can be confusing, and finishes look different on site. Here’s a clear, practical guide to help you choose the right 304 stainless steel square tube the first time.
Answer in brief: 304 stainless steel square tubing is a hollow stainless steel square section made from Type 304 stainless. It combines high strength-to-weight performance with mükemmel korozyon direnci and clean lines for yapısal ve ornamental projects. It is easy to cut, kaynak, and finish, comes in many size ve duvar kalınlığı options, and is widely available from global suppliers.
Stainless steel square tube is a hollow profile with four equal sides and a crisp corner radius, engineered for clean looks and dependable performance. The term stainless steel square generally refers to this square-section çelik boru made from corrosion-resistant alloys.
Sınıf 304 is the workhorse. It offers reliable şekillendirilebilirlik and balanced strength, along with mükemmel korozyon direnci in most fresh water and many mild acidic settings. Because 304 is widely produced, you’ll find broad availability and competitive pricing for square tubing in various size ve duvar kalınlığı ranges.
What is stainless steel square tube
304 vs karbon çeliği: carbon grades can be strong and lower-cost, but they rust without paint or galvanizing. 304 stainless steel square tube resists rust, needs less Bakım, and delivers a higher-end appearance for mimarlık and public spaces.
304 vs alüminyum: aluminum is lighter, but softer. Where dayanıklılık and dent resistance matter, 304 wins. In many builds—especially mimari veya industrial settings needing a crisp, ornamental look—304’s finish and rigidity provide better long-term ESTETİK and lifecycle value.
Below is a practical snapshot. Always confirm the dimension ve duvar kalınlığı you need per local codes or engineer guidance.
| Outside Size (mm) | Wall Thickness (mm) | Approx. kg/m | Typical Finish Options |
| 20 × 20 | 1.0 – 2.0 | 0.6 – 1.2 | Mill finish, brushed, mirror |
| 25 × 25 | 1.2 – 3.0 | 0.9 – 2.2 | Mill finish, brushed, mirror |
| 40 × 40 | 1.5 – 4.0 | 1.7 – 4.4 | Mill finish, brushed, mirror |
| 50 × 50 | 2.0 – 6.0 | 3.1 – 9.1 | Mill finish, brushed, mirror |
| 80 × 80 | 3.0 – 6.0 | 7.4 – 14.6 | Mill finish, brushed, mirror |
Tip: When you specify size, also include cut lengths and tolerance. That reduces waste in the shop.
Tip 304 provides a balanced property set for general use: solid tensile strength, good strength-to-weight, and dependable toughness down to modest sub-zero temps. It’s dirençli to many everyday chemicals and delivers korozyon di̇renci̇ in typical city atmospheres and fresh water.
In splash zones or de-icing salts, consider upgrading to 316. That’s especially helpful for marine docks or salt water environments. In harsher chemical exposure (strong asit or chloride), consult your engineer for a different sınıf or a protective design detail.
Many builders choose 304 stainless steel square sections for light framework, bracing, and yapısal destekler that stay exposed. The neat geometry seats well against plate and gussets, and the straight sides make bolted connections easy to lay out.
İçin yapisal uygulamalar needing higher section modulus, jump up a size veya duvar kalınlığı, or compare to dikdörtgen sections for directional stiffness. Use the round ve square family together: paslanmaz tüp (round) for bridges between frames, and square for frames or a column aesthetic.
Yapısal uygulamalar
Square sections give strong görsel çekicilik. They read modern and sharp. You see them in korkuluk systems, kiosks, brand fixtures, and mimari signage. The clean faces make it simple to align panels and lighting.
Because surfaces are frequently touched, specify a consistent bitirmek. Brushed looks hide fingerprints; mirror shows premium estetik impact. Either way, stainless steel square components remain dayanıklı, reduce repaint cycles, and protect total cost of ownership.
İçinde industrial applications, 304 is a proven choice for light racks, platforms, and guards. For gıda işleme, 304’s smooth surfaces are hygienic and easy to sanitize.
Near coastlines or splash zones on marine equipment, consider 316 for tougher chloride exposure. For mild chemical processes, 304 often works, but always check the media and temperature. If the çevre is strongly acidic, seek materials or coatings specifically rated for that duty.
A mill finish is the starting point—uniform, cost-effective, and ready for fabrication. A Lehçe (brushed or mirror) elevates the look for premium interiors or storefronts.
Routine cleaning is simple: wash with mild detergent and water. That’s the Bakım most jobs need. Avoid harsh cleaners that might attack the passive layer, and rinse thoroughly after cleaning.
You can cut 304 square sections with laser veya plasma for burr-free edges and tight tolerance. Sawing is fine for general cuts; dress the edges for safety.
Fabricators like 304 because it’s consistent and friendly to kaynak. If your design needs sealed seams, ask for kaynaklı paslanmaz çelik tubing per common standards (e.g., A554 for mechanical). It takes coatings and decals well if brand marks are needed, and it nests neatly with plates for clean, strong joints.
cutting 304 square sections with laser
When you place an order, call out:
Good specs reduce surprises, control cost, and improve schedule. If you’re designing multi-shape kits, request a quote for mixed bundles (square/rectangular/round) to optimize freight.
Availability için 304 stainless steel square tubing is strong worldwide. Stock lists often include 20–80 mm outside sizes with common walls. Custom runs are possible for larger sections or unusual walls.
On shipping, bundle by project phase to reduce receiving steps. Ask about lead times for non-stock items and coordinate with your installer. Choose a Tedarikçi with mill test reports, dimensional checks, and stable QC for repeat orders—especially when a single finish must match across sites.
Is 304 stainless square tube magnetic?
304 is generally non-magnetic in the annealed state. Cold work can induce slight magnetism. If low magnetic permeability is critical, specify it up front and test samples.
What finish should I choose for public railing?
Brushed finishes hide fingerprints and minor scuffs. Mirror gives a premium look but shows handling more readily. Match the bitirmek to traffic level and cleaning plan.
Can I use 304 near the ocean?
Yes, but for piers and direct splash from the sea, 316 usually performs better in salt water environments. For inland marine climates with occasional salt exposure, 304 may suffice with proper design and cleaning.
How does square compare to round for structures?
Square makes flat-face connections easy and looks modern. Round is efficient for torsion and bending. Many projects use both: square for frames and round for ties and rails.
Does 304 handle mild acids or cleaners?
In many cases yes, but always test the exact chemical and concentration. Persistent asit splash or high-temperature chlorides demand special care or upgraded materials.
Can I get matching rectangular and square in one delivery?
Absolutely. It’s common to order both for optimized performance. Many service centers stock coordinated dikdörtgen and square families to keep your look consistent.
On a coastal retail job, we paired 50×50×2.5 mm square with 40×20×2.0 mm dikdörtgen stringers. Using brushed finish kept fingerprints under control. Factory miter cuts with laser saved 12 hours on-site and improved fit at every corner. The owner praised the clean lines and long-term çok yönlülük of the system.
304 Stainless (Square)
Carbon Steel (Square)
Aluminum (Square)
From our production floor and customer projects, we validate incoming coils, check weld seams, and hold samples to mechanical specs common to A554 (mechanical tubing). For further reading, many engineers also consult typical 304 data sheets and code references; your project engineer’s spec is the final source of truth for acceptance.
If you’re planning a build and want consistent finish across industrial ve mimari areas, we can align cuts, bundles, and staging by zone. Tell us your size, quantity, and timeline, and we’ll line up stock and processing. We’re here to help—from sample to install.
What’s the difference between 304 stainless steel square tube and 304 stainless steel square tubing?
None—both phrases describe the same product. Some catalogs prefer “paslanmaz çeli̇k kare boru” while others shorten it to “square tube.”
Can I TIG or MIG weld 304 square sections on site?
Yes. Use proper filler and shield. Prep the joint, back-purge when required, and clean heat tint after the kaynak passes.
Do I need passivation after cutting or welding?
It helps restore the chromium oxide layer. Many shops clean and passivate after fabrication for best long-term performance.
Is 304 safe for food contact?
Yes for many uses; it’s widely used in gıda işleme equipment. Always follow local regulations and hygiene practices.
Turkish 
English 
German 
French 
Italian 
Spanish 
Portuguese (Portugal) 
Arabic 
Russian 
Bosnian 
Persian 
Hebrew 
Malay 
Ukrainian 
Portuguese (Brazil)