Unsafe edges and guesswork on heights put people at risk. Confusing rules make it worse. Here’s a clear guide to the korkuluk basics you need—so you can design once, pass inspection, and sleep well.
The standard korkuluk height for most balconies and edges is 1100mm above finished floor levelise tırabzan yüksekliği on stairs is typically 900mm–1000mm (UK) or between 34 and 38 inches (US). Guards in the US International Building Code are 42 inç high. Always check your local building regulation / code before building.
As a professional stainless steel manufacturer and exporter in China, we design, fabricate, and ship code-ready korkuluk ve Küpeşte systems for domestic or commercial projects. Below is a plain-English guide backed by güvenli̇k standartlari—and practical notes from our shop floor.
At the core, balustrade regulations set minimum requirements for height and strength to give protection from falling, collision and impact. In England, Approved Document K explains how barriers are designed to protect people on stairs, ramps, landings, and edges. In the US, the International Building Code sets guard heights and tırabzan yüksekliği bands. Always comply with local legislation because regulations and standards vary by building type ve intended use.
Kısacası, balustrades must be tall enough and capable of withstanding the forces of everyday life. The construction of balustrades must also stop a 100mm sphere (about a child’s head size) from being able to pass through any gaps in many jurisdictions to prevent accidents. Regulations state ve load types (line, point, and distributed load) a barrier is designed to withstand.
UK (typical):
US (typical):
Quick height table
| Region | Balcony / Guard | Stairs – Handrail |
| UK (Part K) | 1100mm | 900–1000mm |
| US (IBC) | 42 in (≈1067mm) | 34–38 in |
Sources: UK Approved Document K; ICC IBC sections on guard and Küpeşte height.
Tip from our factory floor: when drawings arrive without heights, we flag it. It’s faster to belirtmek heights now than re-fabricate later.
For UK projects, BS 6180 (“Barriers in and about buildings”) is the go-to British Standards document for korkuluklar. It sets where standards apply, what point load and line loads to use, and how cam paneller ve dolgu panelleri are checked. This guide is a summary—always read the current standards in full.
For European loading, consult EN 1991-1-1 (Eurocode actions on structures). It classifies spaces (homes, offices, public areas) and assigns uniformly distributed line load, distributed loadve point load values at the design height.
Load requirements vary by occupancy. A simplified snapshot you’ll see referenced across korkuluk specs:
Typical UK line load classes (per BS 6180/Eurocodes)
| Occupancy (indicative) | Line load (kN/m) | UDL on infill (kN/m²) | Point load (kN) |
| Domestic dwellings | 0.36 | 0.50 | 0.25 |
| Offices / retail | 0.74 | 1.00 | 0.50 |
| Assembly areas | 1.50 | 1.50 | 1.50 |
| Dense crowds / stadia | 3.00 | 1.50 | 1.50 |
These are applied at or below 1100mm design height; designers check the load applied için balustrade structure and infill. Always verify the exact category for your intended use.
Visual cue (relative line loads):
Domestic ▮▮ | Offices ▮▮▮ | Assembly ▮▮▮▮▮ | Stadia ▮▮▮▮▮▮▮
A cam korkuluk olabilir visually appealing and safe—if you select the right materials used and detailing. In many UK cases, sertleştirilmiş cam alone is not enough; lamine cam veya structural glass approaches are recommended because if one ply fails, the other retains integrity. Industry alerts warn that monolithic temperli cam (toughened) can shatter and provide no residual capacity, especially under crowd loading.
BS 6180 and Eurocodes identify when point load checks, impact testing, and edge conditions apply. In areas used by children, a 100mm sphere should not be able to pass; do not allow a sphere to pass between dolgu bars or cam paneller. That legal requirement approach is there to güvenliği sağlamak ve prevent accidents.
You’ll see the need for a balustrade on any MERDİVEN, ramp, balcony, or edge that presents a risk of falls. Part K sets the places and areas where the risk is significant and the requirements to ensure safe guard design. For public areas, higher loads and tighter details often apply than for private homes.
On stairs, tırabzan yüksekliği is controlled (UK: 900mm–1000mm; US: 34 and 38 inches). Where a stair is wide, a central Küpeşte may be needed. On ramps, guard and Küpeşte rules are similar—check the bina yönetmeliği chapter for stairs and ramp rules in your region.
Most codes use a child-safety test: a 100 mm diameter probe must not fit through any opening. In short, don’t allow a 100mm sphere to slip between bars or dolgu panelleri—especially at zemin seviyesi where kids can climb. This is a simple, powerful safety measure to keep families safe.
Good outcomes start at the drawing board. The design of the balustrade should match your building type ve intended use—residential terrace, school corridor, mall atrium, or stadium tier. Choose a range of materials—stainless, timber, aluminum, lamine camveya structural glass—that are fit for purpose ve compliant with the current standards. When the height is set and loads known, we make korkuluklar to suit your project’s chosen material and detailing.
Fabrication note: we pre-engineer posts and clamps so your site team spends time installing, not grinding or drilling.
On a recent build, a developer needed a robust, low-maintenance korkuluk için external balconies. We used 316 stainless posts, a top Küpeşteve dolgu made of cam paneller (laminated) set to 1100mm above finished floor level. The result was visually appealing, easy to clean, and designed to protect people without blocking views. Loads met the “other residential” category, and the barrier was designed to withstand ve uniformly distributed line load for that occupancy.
For similar systems and parts, explore:
Heights
Loads
What is the standard height for a balcony balustrade?
In the UK it’s 1100mm; in the US, guards are 42 inç where the IBC applies. Always verify locally for kod uyumluluğu.
Are there different rules for stairs and ramps?
Yes. In the UK the tırabzan yüksekliği bir merdiven veya ramp o 900–1000mm. In the US it’s between 34 and 38 inches. Handrails can be separate from the guard.
Do balustrades have to stop a 100mm sphere?
In many jurisdictions, yes—the opening limit means a 100mm sphere must not pass to ensure that balustrades prevent child head entrapment and prevent accidents.
What glass should I choose for a glass balustrade?
Kullanım lamine cam where required by BS 6180; monolithic sertleştirilmiş cam (diğer adıyla temperli cam) can shatter without residual capacity. Your engineer will set the requirements to ensure safety and impact testing as needed.
How are loads checked on balustrades?
Designers consider uniformly distributed line load, point loadve distributed load classes based on use—homes, offices, or public areas. This aligns with bs 6180 and Eurocodes.
Why does 1000mm appear in handrail guidance?
Because UK Part K sets tırabzan yüksekliği between 900mm ve 1000mm. That band makes stairs comfortable and safe.
We build stainless korkuluk kits ve custom Küpeşte runs to the drawings you approve. We machine posts, polish tubes, and package hardware so your site crew bolts up fast. Whether your project is domestic or commercial, our stainless systems are designed to protect, compliantve fit for purpose—backed by mill certs and load calculations from qualified partners.
Action: Send your drawing set (PDF/DWG). We’ll confirm yükseklik gereksinimleri, yük gereklilikleri, and parts—then ship a complete kit with QA docs.
Turkish 
English 
German 
French 
Italian 
Spanish 
Portuguese (Portugal) 
Arabic 
Russian 
Bosnian 
Persian 
Hebrew 
Malay 
Ukrainian 
Portuguese (Brazil)